Home » Hardware

avaya ip office manual

Question:
Hi,
A friend of mine is asking me some help to program a PBX Avaya Ip Office 500
Could you le me know a source for an step by step startup manual.
Thanks
Solution:
Have you checked the support\documentation section at Avaya’s site.  That is where I would begin.
http://support.avaya.com/css/Products/P0160/Documentation%20Library

monitoring network traffic in/out of Juniper firewall

Question:
I have a Juniper SSG5 and Juniper 5GT, what i am looking for is a way to monitor network traffic in/out of the firewall. I can enable snmp on firewall and send all trap to snmp server. I can see a graph of all network traffic in/out of the firewall. What I am looking is [...]

Recommend – UTM or Simular to provide firewall/content filtering and load balancing

Question:
hi
I am looking for some recommendations for a new install
need a reliable appliance to provide firewall/vpn and decent content filtering. preferably something with logs of web usage by user.
also need dual wan ports for redundancy and load balance.
the load will be up to 50 users at this stage.
environment is a Windows 2008 domain with exchange [...]

How can i activate multi path on the Esx servers?

Question:
Hi,
We have been using Esx 3,5 and 4.0 servers in the my company. All this esx servers have boot and data disks from San 5100 and 4400. All this Esx servers booting San and Esx servers working on the HS20 and HS21 Ibm blade servers.
All this esx serves running from single path. I want to [...]

Printer local port TCP/IP

Question:
Hey I need a sanity check here.
There’s a software vendor I’m working with that is telling me his software has to print through a “local port”. The printer we are trying to use is a tcp/ip network printer down the street from the server. I had originally set it up as a tcp/ip port and [...]

How to Reserver IP on DHCP Server

Question:
Hello Expert,
I have configure DHCP on UC520 But I want to reserve Some IP for Other System Like
192.168.2.2 for server
192.168.2.2 for BackUp server
192.168.2.7 for WEB server
What need to be done for it
My configuration are as follows :
ip dhcp relay information trust-all
ip dhcp use vrf connected
ip dhcp excluded-address 10.1.1.1 10.1.1.10
ip dhcp excluded-address 192.168.10.1 192.168.10.10
ip dhcp excluded-address [...]

How i Check the Traffic on Juniper-NS5GT

Question:
we having a problem in our school with the internet usage, which is every one hour there is a lot of usage and on specific hours there is a huge usage, like every day at 4:00am we have about 1.5GB.
i know the problem is coming from our computers lab (which have 28 computers), in this [...]

how to replaced fuser on hp 2600 color printer

Question:
how to replace  fuser on hp 2600 printer i have part is there instructions?
Solution:
Hi,
You can find the manual here.
http://www.laserpros.com/pdf/HP%202600-2605%20fuser-etb.pdf
Good luck!

Cisco 2811 with Cable Modem Config

Question:
Hi Everyone,
I just recently obtained a Cisco 2811 router and was wondering if i could possibly hookup the outbound ethernet from my roadrunner to F0/0 and have F0/1 go to my switches. I have tried enabling DHCP on FE0/0 and have obtained an IP from the modem, however from this point on i am lost. [...]

Remote Access to a Thin-Client’s Machine Settings – Neoware c50

Question:
We use mostly thin-clients and I’d like to be able to remotely connect to the machines, in the same way that I can connect to our Windows XP PC’s, and take control; or at least be able to make user credential changes on the machine.
Although we have varying makes and models, I have chosen an [...]